How to prepare polyaluminum chloride (PAC G)?

In order to overcome the drawbacks, the fresh aluminum hydroxide gels were proposed to prepare the polyaluminum chloride (PAC G) in this study. The optimal preparation condition of PAC G was obtained by optimizing the preparation conditions including temperature, time and acid concentration.

Can polyaluminum chloride be used in water treatment?

In this study, synthesis and speciation of polyaluminum chloride (PAC) for application in water treatment was investigated using a colorimetric speciation method. It was possible to produce stable preparations of PAC solutions in which a relatively stable cationic polymer predominated.

Why is polyaluminum chloride a good coagulant for water treatment?

Polyaluminum chloride (PAC) is highly effective coagulant for water treatment over conventional coagulants because of low dosage requirement, shorter flocculation time, smaller amount of sludge, high efficiency and low aluminum residual in treated water .

How to prepare high concentration polyaluminum chloride?

A novel membrane distillation concentration method was used to prepare high concentration polyaluminum chloride (PACl) with high content of Al b or Al c. 2.52 mol/L PACl 1 with 88% Al b and 2.38 mol/L PACl 2 with 61% Al c were successfully prepared.

Can aluminum hydroxide gels be used to prepare PAC?

An alternative preparation method of PAC was presented in this paper, using fresh aluminum hydroxide gels as the aluminum source. The procedure without the application of extreme conditions in terms of temperature and pressure had the benefit of saving energy.

What is high-purity poly-aluminum chloride (PACL)?

Poly-aluminum chloride (PACl) is one of the common coagulants for water and wastewater treatment. A new Chinese national standard of PACl has been implemented, where the concentration of insoluble substances, iron and heavy metals is to be controlled strictly, then researches on the preparation of high-purity PACl are needed.