What is cationic polyacrylamide?

Cationic Polyacrylamide is white power or granule, the degree of ion is from 5% to 80%, soluble, good water solubility, can be dissolved in water at any percentage and be undissolved in organic solvents. CPAM shows characteristics of high polymer electrolyte, suitable for wastewater treatment with a negative charge and rich organic matter.

What is polyacrylamide used for?

One of the largest uses for polyacrylamide is to flocculate solids in a liquid. This process applies to water treatment, and processes like paper making and screen printing. Polyacrylamide can be supplied in a powder or liquid form, with the liquid form being subcategorized as solution and emulsion polymer.

What is polyacrylamide (PAM) used for?

In raw water treatment, polyacrylamide (PAM) is used together with activated carbon for the coagulation and clarification of suspended particles in domestic water; in sewage treatment, polyacrylamide (PAM) can be used for sludge dewatering; in industrial water treatment, polyacrylamide (PAM) is primarily used as a formula agent.

What is ionic polyacrylamide?

The ionic forms of polyacrylamide has found an important role in the potable water treatment industry. Trivalent metal salts, like ferric chloride and aluminum chloride, are bridged by the long polymer chains of polyacrylamide. This results in significant enhancement of the flocculation rate.

What is the standard state of polyacrylamide?

Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). ?) Polyacrylamide (abbreviated as PAM or pAAM) is a polymer with the formula (-CH 2 CHCONH 2 -). It has a linear-chain structure. PAM is highly water-absorbent, forming a soft gel when hydrated.

What is acrylamide used for?

Copolymers of acrylamide include those derived from acrylic acid. In the 1970s and 1980s, the proportionately largest use of these polymers was in water treatment. The next major application by weight is additives for pulp processing and papermaking. About 30% of polyacrylamide is used in the oil and mineral industries.