Why is polyaluminum chloride a good coagulant for water treatment?

Polyaluminum chloride (PAC) is highly effective coagulant for water treatment over conventional coagulants because of low dosage requirement, shorter flocculation time, smaller amount of sludge, high efficiency and low aluminum residual in treated water .

Can polyaluminum chloride be used in water treatment?

In this study, synthesis and speciation of polyaluminum chloride (PAC) for application in water treatment was investigated using a colorimetric speciation method. It was possible to produce stable preparations of PAC solutions in which a relatively stable cationic polymer predominated.

What is poly aluminum chloride (PAC)?

Poly Aluminum Chloride (PAC) is a highly efficient coagulant widely used in water treatment processes, particularly for drinking water and industrial wastewater. Known for its superior flocculation properties, PAC has emerged as one of the most effective and environmentally friendly solutions for purifying water.

Is polyaluminium chloride a safe coagulant?

Polyaluminium Chloride is a safer alternative to several other chemical coagulants. For instance, aluminium sulphate has been widely used as coagulant for many years. It removes contaminates and general turbidity from water during the water treatment process.

What are the chemical requirements of polyaluminium chloride?

The chemical requirements of both forms of polyaluminium chloride are given below. Powdered PolyAC shall contain water-soluble aluminium of not less than 14 ± 0.3% w/w as Al, or 30% w/w as Al2O3. Liquid PolyAC shall contain water-soluble aluminium of not less than 2.16% w/w as Al or 10% w/w as Al2O3.

What is polyaluminium chloride?

Polyaluminium chloride is the one of the first chemicals that are added in the water during the coagulation process. The compound is highly charged, where it reacts and neutralizes the negative charge on dirt and other dissolved particles. This will allow the compound to bind together to form larger particles.