Does anionic polyacrylamide improve the coagulation–flocculation process?

The use of anionic polyacrylamide had little effect on this cost but improved the coagulation–flocculation process, leading to a significant increase in the settling speed and reduction in the volume of sludge produced. Table 7.

Can anionic polyacrylamide be used as coagulant aid with ferric sulphate and polyaluminium chloride?

It is important to point out that the optimal coagulant dose can be reduced when anionic polyacrylamide is used as coagulant aid with ferric sulphate and polyaluminium chloride, thus decreasing treatment costs. 3.10. Mechanisms of the process

Which is better cationic or anionic polyacrylamide?

Cationic PAM is especially suitable for treating negatively charged organic substances such as high-concentration colloids and suspended solids in wastewater treatment. Due to its complex production process and superior performance, cationic PAM is usually priced higher than anionic polyacrylamide.

What is the coagulation speed of anionic polyacrylamide?

Coagulation speed: 200 rpm. Flocculation speed: 20 rpm when the coagulant was used alone and 40 rpm when anionic polyacrylamide is added, since the flocs formed were larger and heavier and tended to settle at the lower speed. The influence of the settling time was also studied, the duration of the experiments being fixed at 60 min in all cases.

Do cationic and anionic Pam improve particle flocculation characteristics?

The results revealed that when the ionic strength and MW were low, anionic flocculation characteristics improved, but cationic flocculants performed better when the cationic strength and MW were high. The success of anionic and cationic PAM in flocculation can be related to particle charges that allow for particle flocculation with polymers.

Why is anionic polyacrylamide important in water treatment?

These groups can neutralize charges with positively charged particles in water and form larger flocs through bridging, thus accelerating the sedimentation of particles in the suspension. Anionic polyacrylamide plays a significant role in water treatment in the following aspects: