Can polyaluminum chloride be used in water treatment?

In this study, synthesis and speciation of polyaluminum chloride (PAC) for application in water treatment was investigated using a colorimetric speciation method. It was possible to produce stable preparations of PAC solutions in which a relatively stable cationic polymer predominated.

Why is polyaluminum chloride a good coagulant for water treatment?

Polyaluminum chloride (PAC) is highly effective coagulant for water treatment over conventional coagulants because of low dosage requirement, shorter flocculation time, smaller amount of sludge, high efficiency and low aluminum residual in treated water .

Does polyaluminium chloride coagulant affect the structure and diversity of pollutants?

The polyaluminium chloride (PAC) coagulant was applied to determine the impact of the treatment process on the structure and diversity of these pollutants in urban drinking water.

Is polyaluminium chloride better than polyelectrolyte – alum-based coagulation?

At the Barekese Water Treatment Plant in Ghana, an alternative, the polyelectrolyte – polyaluminium chloride (PAC) is also used in coagulation but limited information is available on the operating conditions required to achieve better performance than alum-based coagulation.

How is polyaluminium chloride synthesized?

Synthesis of polyaluminium chloride 2.1.1. Preparation of solutions (min 37%). Granular Al was introduced slowly and in small portions to continuous magnetic stirring. After the introduction of the fi rst heating was not needed. without heating. A portion of NaOH solution (10 –50%) was placed in a 500 mL flask on a magnetic stirrer.

Is polyaluminium chloride better than alum?

Application of polyaluminium chloride under the recommended process conditions produces relatively better quality treated water than alum application. Freshwater is finite and required for human and ecosystem survival.