How is a polyaluminium ferric chloride flocculant prepared?

A highly efficient polyaluminium ferric chloride (PAFC) flocculant was prepared by adjusting the pH of a leaching solution, the molar ratio of Al to Fe, and the polymerisation temperature. The effects of synthesis and flocculation conditions on the flocculation performance of aged landfill leachate were investigated.

What is poly aluminum chloride (PAC)?

Poly Aluminum Chloride (PAC) is a highly efficient coagulant widely used in water treatment processes, particularly for drinking water and industrial wastewater. Known for its superior flocculation properties, PAC has emerged as one of the most effective and environmentally friendly solutions for purifying water.

Can a PAFC flocculant be used for wastewater treatment?

Based on these results, it can be concluded that a PAFC flocculant has significant potential for use in the pre-treatment and purification of wastewater. Table 1. Comparison of the effects of different flocculants for wastewater treatment.

Can flocculants be used in wastewater treatment?

The potential application of conventional flocculants, bio-flocculants and grafted flocculants in wastewater treatment has been verified and well investigated.

Why are polymeric flocculants used in industrial effluent treatment?

Polymeric flocculants, synthetic as well as natural have become very popular in industrial effluent treatment due to their natural inertness to pH changes, high efficiency with low dosage, and easy handling (Singh et al., 2000).

Can red mud be used to synthesise polyaluminium ferric chloride (PAFC) flocculant?

Red mud was used to synthesise polyaluminium ferric chloride (PAFC) flocculant. The COD and TOC of PAFC to landfill leachate were 72.2% and 82.6%, respectively. PAFC have advantages over commercial PAFC in settlement velocity and TOC removal efficiency. In this study, red mud was used as a raw material to extract Al and Fe using hydrochloric acid.