What are the different types of polyacrylamide (PAM)?

So PAM chemical can be used for petroleum exploration, water treatment, textile, papermaking, mineral processing, medicine, agriculture and other industries, etc. The polyacrylamide (PAM) can be divided into four types, they are anionic PAM, cationic PAM, nonionic and amphoteric PAM. The following are their detailed introduction and specifications.

What is polyacrylamide PAM flocculant?

The following are their detailed introduction and specifications. As a polymer flocculant for water treatment, polyacrylamide pam flocculant can absorb suspended particles in water, act as a link and bridge between particles, make fine particles form relatively large flocs, and speed up the speed of precipitation.

What are the different types of polyacrylamide water treatment?

Description: According to ionic characteristics, it can be divided into four types, non-ionic polyacrylamide NPAM, anionic polyacrylamide APAM, cationic polyacrylamide CPAM and amphoteric polyacrylamide. At present, the PAM water treatment is generally anionic type.

Can polyacrylamide powder be added to sewage?

Polyacrylamide powder can’t be directly added to sewage. It must be dissolved in water before use, and then use polyacrylamide solution for sewage treatment. Use clean water to dissolve PAM powder. Generally, just use water at room temperature, no need to heat it. However, the dissolution is very slow when the water temperature is lower than 5℃.

What is Pam flocculant used for?

All the performances make it have a wide range of applications. PAM flocculant can be used in raw water treatment, sewage treatment, industrial water treatment. Used in conjunction with activated carbon in raw water treatment, it can be used for coagulation and clarification of suspended particles in domestic water.

What is cationic polyacrylamide (CPAM)?

Cationic Polyacrylamide. In general, CPAM is white powder in appearance with an ionic degree ranging from 20% to 55%. It has the characteristics of high polymer electrolyte and is suitable for the treatment of wastewater with negative charge and rich in organic matter.