How to use polyaluminium chloride PAC coagulant in sewage treatment process?

Most industries need to use polyaluminium chloride PAC chemical in the sewage treatment process. The precipitation rate of PAC chemical is much faster and the precipitation effect is better. The use method of PAC coagulant is to dissolve it in a certain proportion and then add it to water.

What is polyaluminium chloride (PAC)?

Polyaluminium chloride (PAC) is a widely used water treatment chemical. It has a wide range of PH adaptation and it is not easy to produce color or other side effects. After the use of poly aluminum chloride, the content of iron, manganese and other heavy metals in water is low, which has a little corrosive effect on the equipment.

What is Pac water treatment chemical?

PAC water treatment chemical has a wider range of applications and is suitable for more types of water quality. Most industries need to use polyaluminium chloride PAC chemical in the sewage treatment process. The precipitation rate of PAC chemical is much faster and the precipitation effect is better.

Can polyaluminium chloride be used in drinking water treatment?

Drinking grade polyaluminium chloride (PAC 30%) can be used in drinking water treatment. Polyaluminum chloride is immediately dissolved in water. During the dissolution process, hydroxide ions release a large amount of positive charges to adsorb negatively charged ions in the water.

What is fengbai poly aluminum chloride flocculation?

Compared with traditional inorganic coagulants, fengbai poly aluminum chloride flocculation precipitation speed is fast, the PH value applicable range is wide, water purification effect is obvious and non-corrosive to pipeline equipment. The product is widely used in drinking water, industrial water, and sewage treatment.

How Pac coagulant can improve the efficiency of sewage treatment?

With the characteristics of rapid reaction speed, PAC coagulant can improve the efficiency of sewage treatment and reduce the water treatment cost. Dosage is small. The configuration concentration is very low, and under the same water quality conditions, its addition amount is also very small compared with other coagulants.