What is organic polymer flocculant cationic polyacrylamide (CPAM)?

The organic polymer flocculant cationic polyacrylamide (CPAM) has the characteristics of a low additive amount, good turbidity removal and water purification effect, and high COD removal efficiency, and it has become the most commonly used polymer flocculant in the oilfield wastewater treatment process [11, 12, 13, 14, 15].

What is cationic polyacrylamide?

Cationic Polyacrylamide is white power or granule, the degree of ion is from 5% to 80%, soluble, good water solubility, can be dissolved in water at any percentage and be undissolved in organic solvents. CPAM shows characteristics of high polymer electrolyte, suitable for wastewater treatment with a negative charge and rich organic matter.

Can cationic polyacrylamide be used in oilfield wastewater treatment?

Author to whom correspondence should be addressed. Cationic polyacrylamide (CPAM) solid particle is one of the most commonly used organic polymer flocculants in oilfield wastewater treatment, but it poses some problems, such as a slow dissolution rate and an easy formation into a “fish-eye” in the process of diluting into aqueous solution.

How CPAM flocculant diluent is used in air flotation machine?

The CPAM suspension flocculant diluent is added at the inlet of the air flotation machine. After the suspended matter in the wastewater is flocculated, the flocculant will float and be scraped away by the scum scraper at the top of the air flotation machine.

What diluent is used to prepare CPAM particles?

In this study, we prepared original CPAM particles into a diluent with a concentration of 0.10%; the CPAM suspension, into a diluent with a concentration of 0.20%; and the inorganic flocculant PAC, into a diluent with a concentration of 10.00%.

What is the viscosity of cationic polyacrylamide emulsion?

When the polymer content was 28.10%, the apparent viscosity of the microemulsion reached more than 321 mPa·s, and its mobility was too poor to be pumped in practical applications. Liu prepared a water-in-water cationic polyacrylamide emulsion with a viscosity of 150~500 mPa·s, but its effective content was only about 15%.