Is Pac better than aluminium sulfate flocculant?

Comparing to aluminium sulfate flocculant, the quality of water treated with PAC is better; the total cost reduced by 15%~30%, and the solubility is better. It can be applied to water with broad pH range. The floc function valid in water of pH 5 to pH 9

Why is polyaluminum chloride a good coagulant for water treatment?

Polyaluminum chloride (PAC) is highly effective coagulant for water treatment over conventional coagulants because of low dosage requirement, shorter flocculation time, smaller amount of sludge, high efficiency and low aluminum residual in treated water .

Is PAC a good flocculant?

The floc function valid in water of pH 5 to pH 9 Comparing to inorganic flocculants, PAC is suitable for water of broad temperature, and is functional in low temperature water. It reduces less basicity less, so less or no basifier needed. The corrosivity of PAC is lower, easy to transfer, handle and operate.

What are the advantages of Pac compared to inorganic flocculants?

Comparing to inorganic flocculants, PAC is suitable for water of broad temperature, and is functional in low temperature water. It reduces less basicity less, so less or no basifier needed. The corrosivity of PAC is lower, easy to transfer, handle and operate. Drinking water and sanitary sewage.

What is flocculation in chemistry?

Flocculation Flocculation is a process of contact and adhesion whereby dispersed particles form larger-size clusters. Flocculation can occur through the use of a coagulant, flocculant or both. Coagulants achieve flocculation through charge neutralisation whereas flocculants physically bind clay and colloidal particles together.

Can PAC be used as coagulant for water treatment?

The ZPD value of PAC was also revealed that the flocculation tendency of PAC particles was very high in water, and the PAC could be used as coagulant for water treatment. Fig. 5.