What is polyacrylamide (PAM) used for?

In raw water treatment, polyacrylamide (PAM) is used together with activated carbon for the coagulation and clarification of suspended particles in domestic water; in sewage treatment, polyacrylamide (PAM) can be used for sludge dewatering; in industrial water treatment, polyacrylamide (PAM) is primarily used as a formula agent.

Why is polyacrylamide used in water treatment?

With the increasing global water scarcity and escalating environmental pollution, efficient water treatment has become paramount. Polyacrylamide, as a versatile polymer compound, has demonstrated significant achievements in the field of water treatment. PAM is widely used as a coagulant and flocculant in wastewater treatment.

What is polyacrylamide used for?

Polyacrylamide (PAM) is a collective term for polymers obtained by the homopolymerization or copolymerization of acrylamide monomers under the action of an initiator. It can be used as a coagulant, retention aid, sludge dewatering agent, and flocculant sedimentation agent, among other uses, and has a wide range of applications.

How polyacrylamide (PAM) is used in sewage treatment?

In sewage treatment, using polyacrylamide (PAM) can increase the recycling rate of water reuse. In petroleum extraction, polyacrylamide (PAM) is mainly used in drilling mud materials and for enhancing oil recovery, widely applied in drilling, well completion, cementing, fracturing, enhanced recovery, and other oil field extraction operations.

What is cationic polyacrylamide used for?

(2) Anionic polyacrylamide: Suitable for treating wastewater containing cationic suspended solids, such as mine wastewater and alkaline wastewater. It can bind with cationic suspended solids in the wastewater, forming flocs to promote solid-liquid separation.

What is the dosage of polyacrylamide?

Typically, the dosage ranges between 1-10 ppm. Adjust the specific dosage based on the wastewater treatment results. (2) Preparation of pre-dissolved solution: Mix polyacrylamide with water to create a pre-dissolved solution with a concentration between 0.1% and 0.5%.