Can polyacrylamide flocculation be used for alum coagulation?

There is a growing interest in the use of ultrafiltration (UF) for the treatment of micro-polluted surface waters for drinking water supplies. Effective pretreatment is required to mitigate membrane fouling and in this paper we have evaluated the application of polyacrylamide (PAM) flocculation with alum coagulation.

What is polyacrylamide used for?

Polyacrylamide (PAM) is a collective term for polymers obtained by the homopolymerization or copolymerization of acrylamide monomers under the action of an initiator. It can be used as a coagulant, retention aid, sludge dewatering agent, and flocculant sedimentation agent, among other uses, and has a wide range of applications.

What factors affect the flocculation effect of cationic polyacrylamide (CPAM)?

Cationic polyacrylamide (CPAM) is a commonly used flocculant for water treatment. Factors that affect the flocculation effect and can be controlled manually include the type and dosage of CPAM, wastewater pH, stirring time and settling time, and their reasonable setting is critical to the flocculation effect of CPAM.

What is polyacrylamide (PAM) used for?

In raw water treatment, polyacrylamide (PAM) is used together with activated carbon for the coagulation and clarification of suspended particles in domestic water; in sewage treatment, polyacrylamide (PAM) can be used for sludge dewatering; in industrial water treatment, polyacrylamide (PAM) is primarily used as a formula agent.

How polyacrylamide (PAM) is used in sewage treatment?

In sewage treatment, using polyacrylamide (PAM) can increase the recycling rate of water reuse. In petroleum extraction, polyacrylamide (PAM) is mainly used in drilling mud materials and for enhancing oil recovery, widely applied in drilling, well completion, cementing, fracturing, enhanced recovery, and other oil field extraction operations.

How does polyacrylamide (PAM) reduce drag?

Polyacrylamide (PAM) can effectively reduce the frictional resistance of fluids, and adding a small amount of polyacrylamide (PAM) to water can reduce drag by 50-80%. Polyacrylamide (PAM) has thickening effects under both neutral and acidic conditions, and when the pH value is above 10, polyacrylamide (PAM) is easily hydrolyzed.