What is organic polymer flocculant cationic polyacrylamide (CPAM)?

The organic polymer flocculant cationic polyacrylamide (CPAM) has the characteristics of a low additive amount, good turbidity removal and water purification effect, and high COD removal efficiency, and it has become the most commonly used polymer flocculant in the oilfield wastewater treatment process [11, 12, 13, 14, 15].

What factors affect the flocculation effect of cationic polyacrylamide (CPAM)?

Cationic polyacrylamide (CPAM) is a commonly used flocculant for water treatment. Factors that affect the flocculation effect and can be controlled manually include the type and dosage of CPAM, wastewater pH, stirring time and settling time, and their reasonable setting is critical to the flocculation effect of CPAM.

Can polyacrylamide flocculant improve water purification capacity?

Using organic polyacrylamide flocculant instead of inorganic flocculant, even don’t modify the sedimentation tank, it can increase water purification capacity by more than 20%. In sewage treatment, the use of PAM flocculant can increase the utilization rate of water recycling and can also be used for sludge dewatering.

What is Pam flocculant used for?

In sewage treatment, the use of PAM flocculant can increase the utilization rate of water recycling and can also be used for sludge dewatering. In industrial water treatment, it is an important formulation agent. PAM polymer is a kind of multifunctional oilfield chemical treatment agent.

Which CPAM product was selected as a flocculant?

The CPAM product No. CPAM-8.14-40.2 in Table 1 was selected as the flocculant, the wastewater identical to that of the single-factor test was the treated object, reducing the wastewater turbidity was the optimization goal, and the CPAM dosage, the wastewater pH and the stirring time were influencing factors.

How do you dissolve polyacrylamide granular flocculant in sewage?

Don’t add PAM powder/granular flocculant to sewage directly. Please dissolve it in water before use, and then its aqueous solution is used for sewage treatment. Use clean water to dissolve polyacrylamide granules/powder. Water at room temperature is sufficient, and generally does not need to be heated.