What is nonionic polyacrylamide PAM?

Nonionic polyacrylamide PAM is mainly used for flocculation and sedimentation of various industrial wastewater, and clarification and disposal of precipitation. Many friends have little knowledge of this type of polyacrylamide. Today, I will introduce the characteristics, efficacy, and usage of nonionic polyacrylamide PAM.

What is polyacrylamide used for?

Polyacrylamide and its co-polymers are used as flocculants or coagulants in industrial wastewater treatment .Homo-polymer is used in this application and can be either nonionic, cationic or anionic depending on the types of wastewater needs to be treated. Also polyacrylamide can be prepared either as linear or as cross-linked.

What is the use of anionic polyacrylamide in water and wastewater treatment?

The main use of anionic polyacrylamides in water and wastewater treatment is as coagulant aid to bridge the coagulated particles formed when an inorganic coagulants such as alum has been used as the primary coagulant. Fig. 2. Hydrolysis of polyacrylamide

Which Polyacrylamides are used in the thickening process of colliery effluent treatment?

1. INTRODUCTION Polyacrylamides are used in the "thickening" process of colliery effluent treatment. The wastewater contains mainly clay particles, in suspension, which are flocculated using non-ionic and anionic polyacrylamides, which have molar masses in the range of 7-15 million g/mol.

What are the three types of polyacrylamide?

Polyacrylamide can be classified to three categories: non-ionic, anionic and cationic polyacrylamide. Keywords: Polyacrylamide; non-ionic; anionic; cationic; wastewater treatment. 1. INTRODUCTION Polyacrylamides are used in the "thickening" process of colliery effluent treatment.

Does nonionic polyacrylamide affect the flocculation process of removing clay?

The presence of nonionic polyacrylamide has slight effect on the flocculation process efficiency of removing clay from industrial wastewater. On the other hand, usin g o f prepared flocculent, it was found that the presence of soap in water in large concentrations has a negative effect on flocculation process.