What factors affect the flocculation effect of cationic polyacrylamide (CPAM)?

Cationic polyacrylamide (CPAM) is a commonly used flocculant for water treatment. Factors that affect the flocculation effect and can be controlled manually include the type and dosage of CPAM, wastewater pH, stirring time and settling time, and their reasonable setting is critical to the flocculation effect of CPAM.

Can polyacrylamide flocculant improve water purification capacity?

Using organic polyacrylamide flocculant instead of inorganic flocculant, even don’t modify the sedimentation tank, it can increase water purification capacity by more than 20%. In sewage treatment, the use of PAM flocculant can increase the utilization rate of water recycling and can also be used for sludge dewatering.

What is the use of polyacrylamide PAM & PAC alum conglomerate?

Polyacrylamide PAM and PAC is mainly used in urban drainage purification, industrial water purification, sewage treatment and other urban areas. Good PAC flocculation effect; PAM coagulant role plays, allowing the formation of PAC alum conglomerate like help precipitate, generally with the use of PAC and PAM, PAM added after the first plus PAC.

What is cationic polyacrylamide flocculant?

Cationic polyacrylamide is widely used for municipal sewage treatment. Its sludge dewatering qualities make it the best for sewage treatment. Cationic polyacrylamide flocculant is grouped depending on its levels of ionicity. The ionicity levels include strong, medium, and weak.

What is Pam flocculant used for?

In sewage treatment, the use of PAM flocculant can increase the utilization rate of water recycling and can also be used for sludge dewatering. In industrial water treatment, it is an important formulation agent. PAM polymer is a kind of multifunctional oilfield chemical treatment agent.

How effective is PAMC flocculation in turbid water clarification?

Chemical and morphology structures of PAMC were characterized and analyzed. Flocculation performance and kinetics were investigated in highly turbid water clarification. Most effective flocculation occurred at pH 4 with the flocculant which contained the highest cationic content.