Is polyacrylamide safe as a cosmetic ingredient?

On the basis of data presented in this report, it is concluded that Polyacrylamide, with less than 0.01% acrylamide monomer content, is safe as a cosmetic ingredient as currently used. CHEMICAL AND PHYSICAL PROPERTIES Definition and Chemical Structure

What percentage of polyacrylamide is in a product?

hold panel data collection. (equivalent to 300 ppm or 0.03%), a minimum of 0.01 mg/g (10 ppm or 0.001%), and a maximum value of 1 mg/g (1000 ppm or 0.1%). The most current data reported by industry to FDA (FDA 1989) and the maximum value of 2.5% reported by COLIPA (SCCNFP 1999) were used to estimate the percentage of Polyacrylamide in a product.

How much acrylamide can a polyacrylamide monomer contain?

Several current manufacturers of Polyacrylamide list a maximum of 0.1% for residual acrylamide monomer content.‘12’ Complete analysis of acrylamide is documented in the World Health Organization (WHO) report on Acrylamide.

Does polyacrylamide have a uniform distribution?

Polyacrylamide is present in only a certain portion of products in each of the product categories, so even if the product type was used from age 3 onward, that product type would not always be one containing Polyacrylamide. A uniform distribution was assumed with minimums of 0.01 years of use to either 63 or 73 years as above.

What is the impurity of polyacrylamide?

IMPURITIES The impurity of most concern in Polyacrylamide is the residual monomer, acryla- mide. Because of the documented neurotoxic effects and carcinogenicity of acryla- mide, the relevant information concerning the monomer is an important consideration in the safety assessment of Polyacrylamide.

Is acrylamide safe?

In Australia, a risk assessment suggested negligable health risks from acrylamide in cosmetics. In 1990, the CIR Expert Panel completed a safety assessment of Polyacrylamide, with the conclusion that Polyacrylamide, with less than 0.01% acrylamide monomer content, is safe as a cosmetic ingredient as currently used.