Can anionic polyacrylamide be used alone?

If the impurities in the water particles larger, and with a certain charge, then the treatment performance of anionic polyacrylamide alone sometimes is good. If the impurities particles are small and non-charged, then it shall be added inorganic flocculants first and then add anionic polyacrylamide powder.

Why do polyacrylamide products have a high molecular weight?

It is because in production the higher the degree of ionization, the smaller the corresponding molecular weight has to be. For polyacrylamide manufacturers, it is certainly we want get a perfect balance point to achieve ‘Double high’ products. If the product as water treatment use, sometimes high molecular weight results are unsatisfactory.

What is sinofloc anionic Pam polyacrylamide?

Sinofloc is supplying dry powder flocculants with anionic charge ranging from 0-100%. What is the Main Characteristics of Sinofloc Anionic PAM Polyacrylamide? Our anionic polymer flocculants is amorphous, free-flowing powder, with Molecular Weight: 5 to 25 million. What Kinds of Polyacrylamide are Available in Sinofloc?

What is polyacrylamide flocculant anionic?

The performance of polyacrylamide flocculant anionic in thickening, flocculation and rheological regulation plays an important role in oil production. It is widely used in drilling, water plugging, acidified water, fracturing, well washing, completion, drag reduction, scale prevention and oil displacement.

What is the molecular weight of polyacrylamide flocculants?

Molecular weight: tens to 20 million 2) Purpose: 1. In the mining industry, large quantities of water are often used and the useful solids in the water must be recovered and the waste water purified for recycling. The application of non-ionic polyacrylamide flocculants can promote the settling of solids,

How to make polyacrylamide solution?

To make the 0.3% solution, weigh 1.200g of polyacrylamide powder accurately and add into 400ml of water in a 600ml beaker. The mixer motor must be capable of maintaining 800-1000 rpm to increase the solution viscosity for 30-35 minutes. The finished solution should be clear and homogeneous.