What is poly-Aluminium chloride (PAC)?

Poly-Aluminium Chloride (PAC)is a kind of highly effective water purificiant, which is wildly used in the purification of table water, industry water, industry circulation water and wasted and polluted water from pharmacy industry, paper making industry and printing and dying industry, as well as life wasted water.

How does polyaluminium chloride affect wastewater treatment equipment?

After the use of Polyaluminium Chloride (PAS), the content of iron, manganese and other heavy metals in water is lowered, which has a little corrosive effect on wastewater treatment equipment.

What is yasa et polyaluminium chloride?

YASA ET Polyaluminium Chloride (PAC) iswidely used in both potable water and wastewater treatment and it has the widest pH and temperature application ranges compared to other water treatment chemicals.

What is polyaluminium chloride used for?

Polyaluminium Chloride (PAC) is used as a flocculent in water treatment applications including drinking water and wastewater treatment. PAC can perform over a wide pH range (5.0 – 8.0) but is most effective when the pH is close to 7.0, this can be achieved with the use of Soda Ash (Sodium Carbonate) or Sodium Bicarbonate.

What is Longwater® polyaluminium chloride (PAC/PACL)?

CAS No.:1327-41-9 EINECS No.:215-477-2 Chemical Formula: [AL2 (OH)nCL6-n] Longwater® Polyaluminium Chloride (PAC/PACL) as a kind of high effective inorganic compound polymer coagulant or flocculant. Longwater® All the polyaluminium chloride is manufactured by National Standard and almost equal to ANSI/AWWA Standard, JIS Standard, NSF Standard.

How much residual aluminium is present in treated water?

Low levels of residual aluminium in the treated water can be achieved, typically around 0.01 to 0.05 ppm. PAC works well at low water temperatures – flocs formed from PAC tend to settle equally well at low and normal water temperatures compared to Alum (aluminium sulphate) flocs that settle slowly at lower temperatures.