Can polyaluminium chloride and anionic polyacrylamide remove CD 2+ and Zn 2+?

Water treatment residuals produced after addition of polyaluminium chloride and anionic polyacrylamide (PAC-APAM WTRs) were evaluated for the potential to remove Cd 2+ and Zn 2+ from aqueous solutions by batch adsorption studies.

Do polyaluminium chloride and anionic polyacrylamide water treatment residuals adsorb phosphorus?

Polyaluminium chloride and anionic polyacrylamide water treatment residuals (PAC-APAM WTRs) as an amendment in three types of soils with the ratios (w/w) of 10%, 15%, and 20% were evaluated for phosphorus adsorption from aqueous solutions by batch studies.

What is anionic Pam used for?

Anionic PAM: It is widely used in waste water treatment of chemical industry, municipal sewage treatment, such as coal washing, mineral processing, metallurgy, iron and steel industry and electronic industry. It is also used in oil industry to enhance oil recovery which is widely used.

Can Pam be used for sludge dewatering?

PAM can be used for sludge dewatering; In industrial water treatment, mainly used as a formula. In the raw water In treatment, using organic flocculant PAM instead of inorganic flocculant, the water purification capacity can be increased by more than 20% even if the sedimentation tank is not reformed.

What are the applications of polyacrylamide (PAM)?

As a result, PAM is widely used in municipal wastewater treatment, oil extraction, pulp and paper production, and other fields. Polyacrylamide is mainly used in the flocculation, sedimentation, and dewatering processes in municipal wastewater treatment.

What does PAC stand for in water treatment?

With improvement and upgrade of technologies and processes in drinking water treatment, more and more water treatment plants use polyaluminium chloride (PAC) as a coagulant in coagulation and sedimentation units and anionic polyacrylamide (APAM) as a dewatering agent in sludge handling units (Duan et al., 2022).