What is polyaluminium chloride used for?

Polyaluminium chloride (aluminium chlorohydrate) also simply called PAC, is used in deodorants and as a coagulant in water purification. This compound is preferred in some cases because of its high charge, which makes it more effective at destabilizing and removing suspended materials than other aluminium salts. CAS No.: 1327-41-9

What stipulations apply to polyaluminium chloride?

The stipulations of this Standard apply when this document has been referenced and only for polyaluminium chloride intended for use in water treatment. Polyaluminium chloride is used in the water treatment industry for the coagulation of organic and mineral colloids prior to sedimentation and/or filtration.

How to manufacture polyaluminium chloride?

Method for manufacturing polyaluminium chloride with aluminum vanadine and calcium aluminate powder CN104671269A(en) 2015-06-03 Method for producing polyaluminum chloride from hydrogen chloride waste gas and aluminum salt water waste liquid generated from anthraquinone synthesizing production

What are the chemical requirements of polyaluminium chloride?

The chemical requirements of both forms of polyaluminium chloride are given below. Powdered PolyAC shall contain water-soluble aluminium of not less than 14 ± 0.3% w/w as Al, or 30% w/w as Al2O3. Liquid PolyAC shall contain water-soluble aluminium of not less than 2.16% w/w as Al or 10% w/w as Al2O3.

Is Pac better than aluminium sulfate flocculant?

Comparing to aluminium sulfate flocculant, the quality of water treated with PAC is better; the total cost reduced by 15%~30%, and the solubility is better. It can be applied to water with broad pH range. The floc function valid in water of pH 5 to pH 9