Why is polyaluminum chloride a good coagulant for water treatment?

Polyaluminum chloride (PAC) is highly effective coagulant for water treatment over conventional coagulants because of low dosage requirement, shorter flocculation time, smaller amount of sludge, high efficiency and low aluminum residual in treated water .

Can PAC be used as coagulant for water treatment?

The ZPD value of PAC was also revealed that the flocculation tendency of PAC particles was very high in water, and the PAC could be used as coagulant for water treatment. Fig. 5.

What is the optimal pH range for Pac coagulation?

The optimal pH range for PAC coagulation performance was 7.5 to 8.0. The coagulation process in conventional water treatment could be enhanced and the ensuing water pH decline reduced appreciably by applying the right dosage of polyaluminium chloride and appropriate process conditions of pH, fluid mixing speed matrix and residence time.

What is polyaluminium chloride used for?

Among the aforementioned products, polyaluminium chloride has become one of the most effective coagulant agents in water and wastewater treatment facilities with various applications, including removal of colloids and suspended particles, organic matter, metal ions, phosphates, toxic metals and color.

Is there an alternative preparation procedure for polyaluminium chloride (PAC)?

An alternative preparation procedure for polyaluminium chloride (PAC), a common inorganic coagulant, is presented in this paper.

Is polyaluminium chloride better than polyelectrolyte – alum-based coagulation?

At the Barekese Water Treatment Plant in Ghana, an alternative, the polyelectrolyte – polyaluminium chloride (PAC) is also used in coagulation but limited information is available on the operating conditions required to achieve better performance than alum-based coagulation.