Why is polyaluminum chloride a good coagulant for water treatment?

Polyaluminum chloride (PAC) is highly effective coagulant for water treatment over conventional coagulants because of low dosage requirement, shorter flocculation time, smaller amount of sludge, high efficiency and low aluminum residual in treated water .

Can polyaluminum chloride be used in water treatment?

In this study, synthesis and speciation of polyaluminum chloride (PAC) for application in water treatment was investigated using a colorimetric speciation method. It was possible to produce stable preparations of PAC solutions in which a relatively stable cationic polymer predominated.

Can PAC be used as coagulant for water treatment?

The ZPD value of PAC was also revealed that the flocculation tendency of PAC particles was very high in water, and the PAC could be used as coagulant for water treatment. Fig. 5.

Does Pam degradation affect flocculant performance?

PAM-based flocculant degradation has been mainly studied for PAMs in aqueous solutions. The degradation of PAMs results in a reduction of the molecular weight of the polymer and can adversely affect the performance of such aqueous solutions in their commercial application as flocculants.

How do high molecular weight PAMS work as flocculants?

High molecular weight PAMs (10 6 to 10 7 g mol −1) work as flocculants by causing suspended particles to bind together to form larger aggregates, which can settle out quickly from solution leaving a clear supernatant (Heath et al. 2006).

Are Pam flocculants toxic?

The potential environmental hazard does not concern the PAM itself, which is generally considered as not toxic (Andersen 2005), but the products of PAM degradation and the residual AMD contained in the flocculants due to incomplete polymerization process (Labahn et al. 2010; Young et al. 2007; Caulfield et al. 2002).