Can polyaluminum chloride be used in water treatment?

In this study, synthesis and speciation of polyaluminum chloride (PAC) for application in water treatment was investigated using a colorimetric speciation method. It was possible to produce stable preparations of PAC solutions in which a relatively stable cationic polymer predominated.

Why is polyaluminum chloride a good coagulant for water treatment?

Polyaluminum chloride (PAC) is highly effective coagulant for water treatment over conventional coagulants because of low dosage requirement, shorter flocculation time, smaller amount of sludge, high efficiency and low aluminum residual in treated water .

Is polyaluminium chloride a safe coagulant?

Polyaluminium Chloride is a safer alternative to several other chemical coagulants. For instance, aluminium sulphate has been widely used as coagulant for many years. It removes contaminates and general turbidity from water during the water treatment process.

Can polyaluminum chloride be used to clarify samples from Iraqi river water?

tory-produced polyaluminum chloride (P AC) were used to clarify samples taken from Iraqi river water. powder. The results after raw water treatment showed that the dosage of P AC required for treatment was case of much higher turbidity. The application of PAC produced rapidly forming flocs and more com- pact sludge compared to that of alum.

What is polyaluminium chloride?

Polyaluminium chloride is the one of the first chemicals that are added in the water during the coagulation process. The compound is highly charged, where it reacts and neutralizes the negative charge on dirt and other dissolved particles. This will allow the compound to bind together to form larger particles.

Can PAC be prepared from aluminum chloride solution?

PAC can be prepared from aluminum chloride solution with the titration of various basification agents such as calcium oxide [16, 21], sodium hydroxide [, , ] and sodium aluminate .