Why is polyaluminum chloride a good coagulant for water treatment?

Polyaluminum chloride (PAC) is highly effective coagulant for water treatment over conventional coagulants because of low dosage requirement, shorter flocculation time, smaller amount of sludge, high efficiency and low aluminum residual in treated water .

What are the synthesis parameters of aluminum chloride hexahydrate?

The synthesis parameters were concentration of aluminum chloride hexahydrate (0.4 to 0.8 M), basicity ratio (2.0 to 2.4), reaction temperature (60 to 80 °C) and time (180 to 360 min). The performance of PΑC for water treatment was also investigated. The monomeric, medium polymeric and colloidal species of PAC were determined by Ferron test method.

How to make poly aluminum chloride?

2.1. Preparation of poly aluminum chloride from kaolin 10 g of dried kaolin added to 35 ml of HCl (36%), sp.gr. (1.15), reflex for 3 hrs., at 150 °C, then, filtrate of the hot solution through filter paper (Whatman 40), the filtrate has animation as PAC ™.

Why is kaolin used in poly aluminum chloride production?

For numerous reasons, including affordability, accessibility, sustainability and eco-friendly, the production of poly aluminum chloride utilizing kaolin and other natural materials is regarded as an innovative technology , , , , .

What is the chemical formula for poly aluminum chloride?

As a polynuclear former, poly aluminum chloride (PAC) is a complex inorganic compound made of aluminum and progressive chlorination of the hydroxyl ion. Al x (OH) y Cl 3x-y or Al (OH) a Cl b (SO4) c is the chemical formula for PAC, where (a+b+2c) =3 and a >1.05.

What is the coagulation time for aluminum sulfate and aluminum chloride coagulants?

However, for aluminum sulfate and aluminum chloride coagulants the coagulation time and settling time were reached to 15 and 35 min, respectively. The results revealed that the residual aluminum concentration in the treated water was very small for synthesized PAC coagulant which was <0.2 mg L −1.