Why is polyaluminium chloride important during water treatment process?

Polyaluminium chloride has several features important during water treatment process, and the features are outlined in the following list:- PAC helps speeding up the process of flocs formation, and the settling of the flocs at the bottom. The process makes flocs that are formed easier to be filtered out.

What is polyaluminium chloride?

Polyaluminium chloride is the one of the first chemicals that are added in the water during the coagulation process. The compound is highly charged, where it reacts and neutralizes the negative charge on dirt and other dissolved particles. This will allow the compound to bind together to form larger particles.

Is polyaluminium chloride a safe coagulant?

Polyaluminium Chloride is a safer alternative to several other chemical coagulants. For instance, aluminium sulphate has been widely used as coagulant for many years. It removes contaminates and general turbidity from water during the water treatment process.

How is polyaluminium chloride dosed?

This was dramatically improved, to over 90%, by dosing polyaluminium chloride. PAC is directly and continuously dosed from the containers in which it is delivered at a rate of about 0.1ml/m 3 of the circulation flow. (It is very important that it is not diluted with water as it will form a gel.)

How does polyaluminium chloride coagulation work?

Continuous coagulation with polyaluminium chloride has long been recommended by PWTAG – especially in the light of the threat from Crytposporidium. Like all coagulants PAC works by extracting and then clumping together dissolved, colloidal and suspended matter. The resulting floc is then trapped on the filter.

What is the coagulation removal rate of polyaluminium chloride (PAC)?

Without coagulation removal rates in a single pass of a medium-rate filter were about 50%. This was dramatically improved, to over 90%, by dosing polyaluminium chloride. PAC is directly and continuously dosed from the containers in which it is delivered at a rate of about 0.1ml/m 3 of the circulation flow.