Why is polyaluminum chloride a good coagulant for water treatment?

Polyaluminum chloride (PAC) is highly effective coagulant for water treatment over conventional coagulants because of low dosage requirement, shorter flocculation time, smaller amount of sludge, high efficiency and low aluminum residual in treated water .

Can polyaluminum chloride be used in water treatment?

In this study, synthesis and speciation of polyaluminum chloride (PAC) for application in water treatment was investigated using a colorimetric speciation method. It was possible to produce stable preparations of PAC solutions in which a relatively stable cationic polymer predominated.

Is polyaluminium chloride a safe coagulant?

Polyaluminium Chloride is a safer alternative to several other chemical coagulants. For instance, aluminium sulphate has been widely used as coagulant for many years. It removes contaminates and general turbidity from water during the water treatment process.

Is polyaluminium chloride better than polyelectrolyte – alum-based coagulation?

At the Barekese Water Treatment Plant in Ghana, an alternative, the polyelectrolyte – polyaluminium chloride (PAC) is also used in coagulation but limited information is available on the operating conditions required to achieve better performance than alum-based coagulation.

What is polyaluminium chloride?

Polyaluminium chloride is the one of the first chemicals that are added in the water during the coagulation process. The compound is highly charged, where it reacts and neutralizes the negative charge on dirt and other dissolved particles. This will allow the compound to bind together to form larger particles.

Is polyaluminium chloride better than alum?

Application of polyaluminium chloride under the recommended process conditions produces relatively better quality treated water than alum application. Freshwater is finite and required for human and ecosystem survival.