What is polyaluminium chloride (PAC)?

Polyaluminium chloride (PAC) is a widely used water treatment chemical. It has a wide range of PH adaptation and it is not easy to produce color or other side effects. After the use of poly aluminum chloride, the content of iron, manganese and other heavy metals in water is low, which has a little corrosive effect on the equipment.

Is Pac better than aluminium sulfate flocculant?

Comparing to aluminium sulfate flocculant, the quality of water treated with PAC is better; the total cost reduced by 15%~30%, and the solubility is better. It can be applied to water with broad pH range. The floc function valid in water of pH 5 to pH 9

How to use polyaluminium chloride PAC coagulant in sewage treatment process?

Most industries need to use polyaluminium chloride PAC chemical in the sewage treatment process. The precipitation rate of PAC chemical is much faster and the precipitation effect is better. The use method of PAC coagulant is to dissolve it in a certain proportion and then add it to water.

What is polyaluminium chloride?

Polyaluminium chloride, also written as poly aluminium chloride, is an inorganic polymer coagulant used for water treatment. Take the first letter of words as abbreviation, it is refered to as PAC chemicals, can be considered as one of the best coagulants.

Is PAC a good flocculant?

The floc function valid in water of pH 5 to pH 9 Comparing to inorganic flocculants, PAC is suitable for water of broad temperature, and is functional in low temperature water. It reduces less basicity less, so less or no basifier needed. The corrosivity of PAC is lower, easy to transfer, handle and operate.

Is polyaluminium chloride a safe coagulant?

Polyaluminium Chloride is a safer alternative to several other chemical coagulants. For instance, aluminium sulphate has been widely used as coagulant for many years. It removes contaminates and general turbidity from water during the water treatment process.