What is polyaluminium chloride (PAC)?

Polyaluminium chloride (PAC) is a widely used water treatment chemical. It has a wide range of PH adaptation and it is not easy to produce color or other side effects. After the use of poly aluminum chloride, the content of iron, manganese and other heavy metals in water is low, which has a little corrosive effect on the equipment.

Why is polyaluminum chloride a good coagulant for water treatment?

Polyaluminum chloride (PAC) is highly effective coagulant for water treatment over conventional coagulants because of low dosage requirement, shorter flocculation time, smaller amount of sludge, high efficiency and low aluminum residual in treated water .

Is PAC a good flocculant?

The floc function valid in water of pH 5 to pH 9 Comparing to inorganic flocculants, PAC is suitable for water of broad temperature, and is functional in low temperature water. It reduces less basicity less, so less or no basifier needed. The corrosivity of PAC is lower, easy to transfer, handle and operate.

Is Pac better than aluminium sulfate flocculant?

Comparing to aluminium sulfate flocculant, the quality of water treated with PAC is better; the total cost reduced by 15%~30%, and the solubility is better. It can be applied to water with broad pH range. The floc function valid in water of pH 5 to pH 9

What is fengbai poly aluminum chloride flocculation?

Compared with traditional inorganic coagulants, fengbai poly aluminum chloride flocculation precipitation speed is fast, the PH value applicable range is wide, water purification effect is obvious and non-corrosive to pipeline equipment. The product is widely used in drinking water, industrial water, and sewage treatment.

Can PAC be used as coagulant for water treatment?

The ZPD value of PAC was also revealed that the flocculation tendency of PAC particles was very high in water, and the PAC could be used as coagulant for water treatment. Fig. 5.