What is polyaluminum chloride coagulant?

1. Introduction Polyaluminum chloride (PAC) coagulant has been developed and used in water and wastewater treatment since the 1980s throughout the world (Jiang, 2001). PAC is made by partial hydrolysis of acid aluminum chloride solution using a specific reactor.

Is polyaluminium chloride better than polyelectrolyte – alum-based coagulation?

At the Barekese Water Treatment Plant in Ghana, an alternative, the polyelectrolyte – polyaluminium chloride (PAC) is also used in coagulation but limited information is available on the operating conditions required to achieve better performance than alum-based coagulation.

What is poly Aluminium chloride (PAC)?

Poly Aluminium Chloride (PAC) is most commonly used in the water treatment industry as a coagulant. It is characterised by the degree of basification – the higher this number the higher the polymer content which equals a more efficient product in the clarification of water products.

What is the difference between Alum and PACL coagulation?

The restabilization zone of PACl coagulation disappears at a higher final pH value than that of alum coagulation. Moreover, the charge neutralization and sweep coagulation zones of PACl are broader in the ranges of coagulant dosage (as Al) and pH value than those of alum.

How does poly Aluminium chloride work?

Poly Aluminium Chloride is a highly efficient water treatment chemical where it works as a coagulant to extract and clump together contaminants, colloidal and suspended matter. This results in the formation of floc (flocculation) for removal via filters. The below image showing coagulation in action illustrates this process.

What does PAC stand for in water treatment?

Clear to slightly yellow in colour it is also referred to as PAC, PAX, or Polyaluminium Hydroxide Chloride Sulphate Solution. What is the use of Poly aluminium chloride? Poly Aluminium Chloride (PAC) is most commonly used in the water treatment industry as a coagulant.