What is polyaluminium chloride (PAC)?

Poly aluminium chloride (PAC) used at YASA ET for wastewater treatment projects has the characteristics of good coagulation performance, large alum particles formation, fast settling, low dosage, high efficiency, and wide application range. Due to the positive charge Polyaluminium Chloride (PAC) has strong adsorption of suspended matter in water.

How does polyaluminium chloride affect wastewater treatment equipment?

After the use of Polyaluminium Chloride (PAS), the content of iron, manganese and other heavy metals in water is lowered, which has a little corrosive effect on wastewater treatment equipment.

Can Pam be used for sludge dewatering?

PAM can be used for sludge dewatering; In industrial water treatment, mainly used as a formula. In the raw water In treatment, using organic flocculant PAM instead of inorganic flocculant, the water purification capacity can be increased by more than 20% even if the sedimentation tank is not reformed.

How to use polyaluminum chloride?

Usage :1. Dissolve solid polyaluminum chloride into liquid by adding 1:3 water, and then dilute it with 10-30 times water to the required concentration before use. 2, dosage can be determined according to the different turbidity of raw water, the best dosage, generally raw water turbidity in 100-500mg/L, each thousand tons of dosage is 10-20kg.

What is yasa et polyaluminium chloride?

YASA ET Polyaluminium Chloride (PAC) iswidely used in both potable water and wastewater treatment and it has the widest pH and temperature application ranges compared to other water treatment chemicals.

Why is polyaluminium chloride important during water treatment process?

Polyaluminium chloride has several features important during water treatment process, and the features are outlined in the following list:- PAC helps speeding up the process of flocs formation, and the settling of the flocs at the bottom. The process makes flocs that are formed easier to be filtered out.