Why is polyaluminum chloride a good coagulant for water treatment?

Polyaluminum chloride (PAC) is highly effective coagulant for water treatment over conventional coagulants because of low dosage requirement, shorter flocculation time, smaller amount of sludge, high efficiency and low aluminum residual in treated water .

What is the role of polyaluminum chloride in sewage treatment?

At the same time, polyaluminum chloride can also play a role in assisting coagulation, helping polyacrylamide to accelerate the sedimentation, making the water clear and sludge sinking. This is why need to add PAC first and then PAM in sewage treatment process.

Is polyaluminium chloride a safe coagulant?

Polyaluminium Chloride is a safer alternative to several other chemical coagulants. For instance, aluminium sulphate has been widely used as coagulant for many years. It removes contaminates and general turbidity from water during the water treatment process.

Can Pam be used for sludge dewatering?

PAM can be used for sludge dewatering; In industrial water treatment, mainly used as a formula. In the raw water In treatment, using organic flocculant PAM instead of inorganic flocculant, the water purification capacity can be increased by more than 20% even if the sedimentation tank is not reformed.

How to use polyaluminum chloride?

Usage :1. Dissolve solid polyaluminum chloride into liquid by adding 1:3 water, and then dilute it with 10-30 times water to the required concentration before use. 2, dosage can be determined according to the different turbidity of raw water, the best dosage, generally raw water turbidity in 100-500mg/L, each thousand tons of dosage is 10-20kg.

What is poly Aluminium chloride (PAC)?

Poly Aluminium Chloride (PAC) has emerged as a valuable and versatile tool in water treatment processes, it plays a crucial role in making water safe for consumption, industrial use, and environmental preservation. Why we use Poly Aluminium Chloride (PAC) for water treatment?