Is polyaluminium chloride better than polyelectrolyte – alum-based coagulation?

At the Barekese Water Treatment Plant in Ghana, an alternative, the polyelectrolyte – polyaluminium chloride (PAC) is also used in coagulation but limited information is available on the operating conditions required to achieve better performance than alum-based coagulation.

Are polyaluminum chloride and polyelectrolyte composite coagulants effective in drinking water treatment?

Abdellah-Anouar. El Foulani, Mohamed. Tahiri & Polyaluminum chloride (PAC)/natural polyelectrolyte composite coagulants have received considerable attention recently due to their exceptional properties in drinking water treatment.

What is the most effective dosage for polyaluminum chloride (PAC) & aluminum sulfate (FEC?

The findings revealed that the most effective dosages for polyaluminum chloride (PAC), aluminum sulfate (Al 2 (SO 4) 3), and ferric chloride (FeCl 3) were 20, 10, and 20 mg/L, respectively.

What are composite coagulants based on Pac and polyelectrolytes?

Composite coagulants based on PAC and polyelectrolytes have been developed to increase the aggregation capacity of PAC and subsequently enhance treatment efficiency [13, 14, 15]. Organic–inorganic composite flocculants have the specificity of combining the advantages of these components to correct the deficiencies present in their individual uses.

Do polyelectrolyte composite coagulants improve coagulation performance?

El Foulani, Mohamed. Tahiri & Polyaluminum chloride (PAC)/natural polyelectrolyte composite coagulants have received considerable attention recently due to their exceptional properties in drinking water treatment. However, the criteria for selecting polyelectrolytes grafted into the PAC to improve coagulation performance are not yet well defined.

What is anionic polyacrylamide (PAM)?

Anionic polyacrylamide (PAM) possesses interconnected and active groups that establish robust bonds with the surface of suspended colloids, promoting the formation of coarse particles among the suspended solids and a mixture of insoluble particles in water (Irfan et al. 2017).