What is poly Aluminium chloride used for?

Uses : Poly aluminium chloride is a polyvalent inorganic polymer used as a coagulant in the treatment of potable water, industrial waste water and many other waste water situations. Appearance : White-light yellow or yellow, odorless, hygroscopic powder. 2. HEALTH HAZARD INFORMATION Ingestion may cause nausea and/or vomiting.

What are the safety precautions when using polyaluminium chloride?

Corrosive CONTAINS Polyaluminium Chloride RISK PHRASES R34 Causes burns. SAFETY PHRASES S1/2 Keep locked up and out of the reach of children. S20 When using do not eat or drink. S24/25 Avoid contact with skin and eyes. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

What happens if you swallow polyaluminium chloride?

Polyaluminium Chloride 10 – 18% Solution 11 TOXICOLOGICAL INFORMATION INHALATION Vapours may irritate the respiratory system and cause coughing, asthmatic breathing and breathlessness. INGESTION Swallowing concentrated chemical may cause severe internal injury. Liquid irritates mucous membranes and may cause abdominal pain if swallowed.

Does polyaluminium chloride cause burns?

Polyaluminium Chloride 10 – 18% Solution Corrosive CONTAINS Polyaluminium Chloride RISK PHRASES R34 Causes burns. SAFETY PHRASES S1/2 Keep locked up and out of the reach of children. S20 When using do not eat or drink. S24/25 Avoid contact with skin and eyes.

Is aluminium chloride a hazard?

Aluminium chloride, basic is reported to produce slight, reversible skin irritation in some rat studies; however, the effects were not sufficient to warrant a hazard classification [OECD TG 404; NICNAS]. – Inhalation: May cause irritation of the nose and throat (mucous membranes).

Can PAC be stored at a high temperature?

PAC may become unstable when stored for long time at temperatures higher than 40°C.PAC tends to hydrolyze to a white turbid solution and loses effectiveness when it is kept long as a diluted solution of less than approximately 3%( as Al2O3). The storage area should have a non-combustible and corrosion resistant floor.