Does polyaluminium chloride coagulant affect the structure and diversity of pollutants?

The polyaluminium chloride (PAC) coagulant was applied to determine the impact of the treatment process on the structure and diversity of these pollutants in urban drinking water.

Is polyaluminium chloride better than polyelectrolyte – alum-based coagulation?

At the Barekese Water Treatment Plant in Ghana, an alternative, the polyelectrolyte – polyaluminium chloride (PAC) is also used in coagulation but limited information is available on the operating conditions required to achieve better performance than alum-based coagulation.

How should coagulation pH be matched to raw water alkalinity?

PACl basicity should be matched to raw water alkalinity, so that coagulation pH is as close as possible to the pH of minimum solubility of the coagulant. The solids separation process used for treatment was also found to be important for coagulant selection.

Can coagulation remove pollutants from urban drinking water?

Conclusions In this study, the coagulation method, which is simple and cost-efficient, is proven as an effective process to remove pollutants from urban drinking water. Although several coagulants have been experimented with for urban drinking water treatment, the PAC coagulant was investigated as efficient for TOC, TSS, and TN removal.

What is the optimal pH range for Pac coagulation?

The optimal pH range for PAC coagulation performance was 7.5 to 8.0. The coagulation process in conventional water treatment could be enhanced and the ensuing water pH decline reduced appreciably by applying the right dosage of polyaluminium chloride and appropriate process conditions of pH, fluid mixing speed matrix and residence time.

What are the disadvantages of alum coagulant?

Water Practice and Technology 1 October 2021; 16 (4): 1215–1223. doi: Alum, the predominant coagulant in conventional drinking water treatment schemes, has various disadvantages including the production of large volumes of sludge, lowering water pH (requiring pH adjustment using lime), limited coagulation pH range of 6.5 to 8.0, etc.