What is polyaluminium chloride used for?

Polyaluminium chloride (aluminium chlorohydrate) also simply called PAC, is used in deodorants and as a coagulant in water purification. This compound is preferred in some cases because of its high charge, which makes it more effective at destabilizing and removing suspended materials than other aluminium salts. CAS No.: 1327-41-9

Why is polyaluminium chloride important during water treatment process?

Polyaluminium chloride has several features important during water treatment process, and the features are outlined in the following list:- PAC helps speeding up the process of flocs formation, and the settling of the flocs at the bottom. The process makes flocs that are formed easier to be filtered out.

Is polyaluminium chloride a safe coagulant?

Polyaluminium Chloride is a safer alternative to several other chemical coagulants. For instance, aluminium sulphate has been widely used as coagulant for many years. It removes contaminates and general turbidity from water during the water treatment process.

Why are aluminium based polymers used in water treatment?

These shortfalls in the use of alum have led to the synthesis of improved, aluminium-based polymers, which have been used extensively, over the few last decades, for treating water due to their high efficiency at lower dosages, and wider pH and temperature application ranges (Sahu & Chaudhari 2013).

Is polyaluminium chloride better than polyelectrolyte – alum-based coagulation?

At the Barekese Water Treatment Plant in Ghana, an alternative, the polyelectrolyte – polyaluminium chloride (PAC) is also used in coagulation but limited information is available on the operating conditions required to achieve better performance than alum-based coagulation.

What is the difference between Alum and poly Aluminium chloride?

The cost of poly Aluminium Chloride is roughly twice/thrice that of Alum, which is $0.4/ Kg. Regarding the impact on treated water, the increase in chloride from poly Aluminium Chloride is much lower than the sulphate increase from Alum, resulting in lower overall increases in the TDS of the treated water.