What is polyaluminium chloride (PAC)?

Polyaluminium chloride (PAC) is a widely used water treatment chemical. It has a wide range of PH adaptation and it is not easy to produce color or other side effects. After the use of poly aluminum chloride, the content of iron, manganese and other heavy metals in water is low, which has a little corrosive effect on the equipment.

What does PAC stand for in water treatment?

Clear to slightly yellow in colour it is also referred to as PAC, PAX, or Polyaluminium Hydroxide Chloride Sulphate Solution. What is the use of Poly aluminium chloride? Poly Aluminium Chloride (PAC) is most commonly used in the water treatment industry as a coagulant.

How to use polyaluminium chloride PAC coagulant in sewage treatment process?

Most industries need to use polyaluminium chloride PAC chemical in the sewage treatment process. The precipitation rate of PAC chemical is much faster and the precipitation effect is better. The use method of PAC coagulant is to dissolve it in a certain proportion and then add it to water.

Is Pac better than aluminium sulfate flocculant?

Comparing to aluminium sulfate flocculant, the quality of water treated with PAC is better; the total cost reduced by 15%~30%, and the solubility is better. It can be applied to water with broad pH range. The floc function valid in water of pH 5 to pH 9

How does polyaluminium chloride affect wastewater treatment equipment?

After the use of Polyaluminium Chloride (PAS), the content of iron, manganese and other heavy metals in water is lowered, which has a little corrosive effect on wastewater treatment equipment.

Is PAC a good flocculant?

The floc function valid in water of pH 5 to pH 9 Comparing to inorganic flocculants, PAC is suitable for water of broad temperature, and is functional in low temperature water. It reduces less basicity less, so less or no basifier needed. The corrosivity of PAC is lower, easy to transfer, handle and operate.